Connecting Additional Equipment - Sony FD Trinitron WEGA KV-20FV300 Operating Instructions Manual

Connecting Additional Equipment

TV and VCR
1
From
cable/antenna


To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear
of your VCR).
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.


You can use the


For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
2
VCR
Optional connection
button to switch between the VHF/UHF and VIDEO inputs.
Connecting Your TV
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
5