Sony KV-14LM1K Instruction Manual page 12

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
12
Menu System
Level 2
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Manual Programme Preset
Programme: 01
System:
B/G
Channel: C 21
AFT: On
Skip:
No
Confirm
OK
Level 3 / Function
3 After selecting the Channel option, press
Then press or
tuning ("C" for terrestrial channels or "S" for
cable channels). Next press
press the number buttons to enter directly the
channel number of the TV Broadcast or the
channel of the VCR signal. If you do not
know the channel number, press
search for it. When you tune the desired
channel, press OK twice to store.
Repeat all the above steps to tune and store more
channels.
b)
Normally the automatic fine tuning (AFT) is
operating, however you can manually fine
tune the TV to obtain a better picture
reception in the case that the picture is
distorted.
To do that: while watching the channel (TV
Broadcast) you wish to fine tune, select the
AFT option and press
or to adjust the fine tuning between -15
and +15. Finally press OK twice to store.
c)
Skip any unwanted programme numbers
when they are selected with the PROGR +/-
buttons.
To do that: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number you want to skip.
When the programme you want to skip
appears on the screen, select the Skip option
and press . Next press
Yes. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select "No"
instead of "Yes" in the step above.
to select the channel
. After that,
or
. Next press
or to select
continued...
.
to