Using The Timer Menu - Sony KV-13FS100, KV-13FS110, KV-20FS100, KV-24FS100 Operating Instructions Manual

Operating Instructions
Using the Timer
To access the Timer menu, refer to the following steps:
To Display To Highlight
MENU MENU
Current Time Set your TV to the current day and time.
g
Press
1 Use the
2 Press


You must set the Current Time before you can use Timer 1 and Timer 2.
Timer 1 and Use your timers settings to program your TV by day, time, duration and
Timer 2 channel. The timer's duration is maximum of 6 hours. When the channel
Scheduled is fixed, it is not necessary to set the channel.
viewing With the menu open, set cursor on Timer 1 or Timer 2:
1 Press
2 Press
press
3 Press


You can set the Timer to On, Off, or Set. Once the timer is set, you can turn it On or Off
without having to go through the settings. When you set Timer 1 or Timer 2, a red light on
the front panel of your TV will turn on.


When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the
event of any loss of power, Current Time and Timer 1 and Timer 2 settings will be cleared.
28
Menu
To Select
to open Current Time menu:
F f
or button to enter the day and time, then press
to exit the menu.
F f
or to select Timer 1 or Timer 2, then press
F f
or to enter the desired day, time, duration and channel, then
. The Timer status should be On when the Timer has been set.
to exit the menu.
Timer
Timer 1 : Set
Timer 2 : Set
Current Time
Move Select
.
End
.