Setting Up The Channel List; Using Initial Setup - Sony KD-30XS955, KD-32XS945, KD-34SX955, KD-36SX955 Operating Instructions Manual

Setting Up the Channel List

Using Initial Setup

z
For more details on using
Tilt Correction and Vertical
Correction, see pages 89-90.
z
To exit the Tilt Correction
and Vertical Correction screens,
press the MENU button.
z
If you are using a
CableCARD, Auto Program is
disabled for the CABLE input.
After you finish connecting the TV, you need to run the Initial Setup
feature, which automatically creates a list of available analog and
digital channels and lets you correct tilt and vertical correction
settings. The Initial Setup screens appear when you turn on your TV
for the first time after hooking it up.
To run Initial Setup
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
Using the remote control, move the highlight to the desired
language, then press
Correction screen appears.
2
Press to correct any tilt of the picture. You can choose a
B b
correction between +7 and -7. When finished, press
3
The Vertical Correction screen appears. Press
vertical correction to the picture. You can choose a correction
between +5 and -5. When finished, press
4
The next screen instructs you to connect your cable/antenna.
Check that you've connected your signal source correctly.
To start Auto Program, highlight
Auto Program automatically creates a list of receivable analog
and digital channels. Auto Program may take 50 minutes or more
to complete. A progress bar is displayed while the channel list is
being created.
When Auto Program is finished, the lowest numbered channel is
displayed.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 84.
To add individual digital channels
Use the Digital Channel feature as described on page 84.
To reset the TV to factory settings
1
Press to turn on the TV.
POWER
2
Hold down on the remote control.
RESET
3
Press on the TV. (The TV will turn itself off, then back
TV POWER
on.)
4
Release .
RESET
to select that language. The Tilt
V v
.
and then press
Yes
.
to make a
.
43