Sony FD Trinitron KV-29XL71K Operating Instructions Manual page 8

Switching on the TV and Automatically Tuning
5 The Auto Tuning menu appears on the screen. Press the OK button to
select Yes.
6
The TV starts to automatically search and store all available broadcast
channels for you.
This procedure could take some minutes. Please be patient and do
not press any buttons, otherwise the automatic tuning will not be
completed.
If no channels were found during the auto tuning process then a new
menu appears automatically on the screen asking you to connect the
aerial. Please connect the aerial (see page 6) and press OK. The
auto tuning process starts again.
7
After all available channels are captured and stored, the Programme
Sorting menu appears automatically on the screen enabling you to
change the order in which the channels appear on the screen.
a) If you wish to keep the broadcast channels in their tuned order, go to
step 8.
b) If you wish to store the channels in a different order:
1 Press the v or V button to select the programme number that has
the channel (TV Broadcast) you wish to rearrange, then press the b
button.
2 Press the v or V button to to select the new programme number
position for your selected channel (TV Broadcast), then press B.
3 Repeat steps b)1 and b)2 if you wish to change the order of the other
channels.
8 Press the MENU button to remove the menu from the screen.
Your TV is now ready for use.
8 First Time Operation
Do you want to start
automatic tuning?
Yes
No
OK
Auto Tuning
Programme: 01
System: B/G
Channel: C21
Searching...
No channel found
Please connect aerial
Confirm
OK
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
OK
Exit:
MENU
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58 05 C27
Select new position:
OK
Exit:
MENU
MENU