Sony FD Trinitron KV-21FX30K Instruction Manual page 13

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
14
Menu System
Level 2
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Level 3 / Function
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number with the channel
you wish to name. When the programme you
want to name appears on the screen, select
the Label option and press
r
press o to select a letter, number or
"-" for a blank. Press
character. Select the other four characters in
the same way. After selecting all the
characters, press OK twice to store.
c)
Normally the automatic fine tuning (AFT) is
operating, however you can manually fine
tune the TV to obtain a better picture
reception in the case that the picture is
distorted.
To do this: while watching the channel (TV
Broadcast) you wish to fine tune, select the
AFT option and press
or to adjust the fine tuning between -15
and +15. Finally press OK twice to store.
d)
Skip any unwanted programme numbers
when they are selected with the PROGR +/-
buttons.
To do this: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number you want to skip.
When the programme you want to skip
appears on the screen, select the Skip option
and press . Next press
Yes. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select "No"
instead of "Yes" in the step above.
e)
This option allows you to view and record
correctly scrambling channels when using a
decoder connected to the Scart
directly or through a VCR.
This option is only available depending
on the country you have selected in the
"Language/Country" menu.
To do this: select the Decoder option and
press . Next press
Finally press OK twice to confirm and store.
To cancel this function afterwards, select "Off"
instead of "On" in the step above.
. Next
to confirm this
. Next press
or to select
:
2/
S
or to select On.
continued...