Noise Reduction; Av2 Output - Sony FD Trinitron KV-21FX30K Instruction Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Level 2
Detail Set Up

Noise Reduction:

Auto

AV2 Output:

TV
RGB Centring: 0
Picture Rotation: 0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
Picture Rotation: 0
OK
Level 3 / Function
NOISE REDUCTION
The "Noise Reduction" option in the "Detail Set
Up" menu allows you to automatically reduce
the picture noise visible in the broasdcast
signal.
To do this: after selecting the option, press
Then press or to select Auto. Finally
press OK to confirm and store.
To cancel this function afterwards, select "Off"
instead of "Auto" in the step above.
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set
Up" menu allows you to select the source to be
output from the Scart connector
order you can record from this Scart any signal
coming from the TV or from external
equipment connected to the Scart connector
:1/
or front connectors
If your VCR supports Smartlink, this
procedure is not necessary.
To do this: after selecting the option, press
Then press or to select the desired
output signal: TV, AV1, AV3 or AUTO.
If you select "AUTO", the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
:2/q
Scart or to a VCR connected to
this Scart, please remember to change back
the "AV2 Output" to "AUTO" or "TV" for
correct unscrambling.
.
:2/q
in
GB
3 and 3.
.
continued...
15
Menu System