Selecting The Output Source For The Scart Sockets G Or H - Sony FD Trinitron KV-28DX20U Instruction Manual

Optional Equipment
Connecting equipment to the TV
Selecting the output source for the scart
sockets or
H
G
1. Press the MENU button on the remote control to display the
menu on the TV screen.
v
2. Press the button to select the
b
screen then press the
CONNECTION' menu screen.
v
3. Press the button to highlight 'TV Screen' (input source for the
TV screen) or 'Output' (output source for
sockets) then press the
B b
4. Press the or button to select the desired source (see below)
then press the OK button to confirm:
TV Screen TV, AV1, RGB, AV2, YC2, AV3
Output TV, AV1, AV2, YC2, AV3, AUTO
5. Press the MENU button to remove the menu from the TV screen.
Smartlink
Smartlink is a direct link between your TV set and VCR.
For Smartlink you need:
• a VCR which supports Smartlink, NexTView Link or
Megalogic.
• A fully-wired 21-pin scart cable to connect your VCR to scart
connector .
3
The features of Smartlink are:
• tuning information such as the channel overview are
downloaded from the TV set to the VCR.
• direct TV recording : While watching TV you need to press just
one button on the VCR to record this programme.
For more information on Smartlink please refer to your VCR
instruction manual.
symbol on the menu
button to enter the 'VIDEO
/
2
b
button to confirm.
VIDEO CONNECTION
TV Screen
Output
TV
or
3
s 2
[TV - - - - -]
[AV 1 - - - - -]
AV1
29