Sony SPP-S9226 Operating Instructions Manual page 62

Using the Caller ID list (continued)
Notes
• When the Long Distance Saver function is set to "ACTIVE", "LONG
DISTANCE" can be selected in step 2 (see page 22).
• If the area code is not entered, "PLEASE ENTER AREA CODE" will appear
on the display, and you will not be able to call back. Enter the area code (see
page 15).
• Do not allow more than 20 seconds to elapse during the operation procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 64.
• If the phone is connected to a Private Branch Exchange (PBX), you may not
be able to call back from the Caller ID list because an outside line access digit
is necessary.
Tips
• You may press (TALK) or (LONG DIST. SAVER) on the cordless handset (If
you're at the base phone, pick up the handset from the base phone or press
(SPEAKERPHONE) or (LONG DIST. SAVER)) to make a call instead of doing
steps 2 and 3.
• When you select "[GO BACK]", you can return to the previous set display by
pressing Jog Dial. (If you're at the base phone, press Jog Button (ENTER).)
US
62
Caller ID Features