Custom Settings (Custom Setup) - Sony DVP-NS700V Operating Instructions Manual

Custom Settings
SETUP)
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 74).
The default settings are underlined.
xAUTO PLAY
Select the Auto Play setting when you turn on
the player.
OFF
TIMER
DEMO1
DEMO2
xDIMMER
Adjusts the lighting of the front panel display.
BRIGHT
DARK
OFF
78
(CUSTOM
CUSTOM SETUP
AUTO PLAY:
DIMMER:
PAUSE MODE:
PLAYBACK MEMORY:
TRACK SELECTION:
CD DIRECT:
Does not use "TIMER,"
"DEMO1," or "DEMO2" to start
playback.
Starts playing when the player is
turned on. The player can start
playback at any time when
connected to a timer (not
supplied). Set the timer when the
player is in standby mode (the
power indicator lights up in red).
Starts playing the first
demonstration automatically.
Starts playing the second
demonstration automatically.
Makes the front panel display
bright.
Makes the front panel display dark.
Turns off the lighting of the front
panel display.
xPAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
AUTO
FRAME
xPLAYBACK MEMORY (DVD VIDEO/
VIDEO CD only)
OFF
BRIGHT The player can store the "SUBTITLE" and
AUTO
other settings of each disc for up to 50 discs
ON
OFF
(Playback Memory).
OFF
Set the Playback Memory function "ON" or
"OFF."
ON
OFF
The following settings are stored in memory
by the Playback Memory function.
— ANGLE (page 60)*
— AUDIO (page 54)*
— BNR (page 62)
— DIGITAL VIDEO ENHANCER (page 64)
— SUBTITLE (page 61)*
— VIDEO EQUALIZER (page 63)
DVD VIDEO only
Notes
The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is cancelled.
The Playback Memory function cannot be used for
DVD-RWs in VR mode.
During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
The picture, including subjects
that do not move dynamically, is
output in high resolution.
Stores the settings in memory when
you eject the disc.
Does not store the settings in
memory.