PRODUCT INFORMATION
OPERATING DRAWER WITH WORK SURFACE
PERMISSIBLE ENVIRONMENTAL CONDITIONS
Conditions
Normal Use
Storage & Transport
5
Pull the work surface the
whole way out to conceal
your supplies and for
extra working space.
HOW TO CARE FOR YOUR TROLLEY
•
Use only a mild solution of 4:1 diluted non-alcohol cleaner such as
Simple Green®, 409®, Fantastik® or some other non-abrasive cleaner to
wipe down the metal surfaces of the trolley. Apply with a damp (not wet)
lint-free cloth. Be sure excess liquid does not drip onto, or into, any of the
electrical controls or mechanisms. Be sure that the unit is unplugged before
cleaning these areas. Wipe these areas carefully with a lint free cloth.
•
The slides and casters of your trolley require no general maintenance or lubrication.
•
The wooden portions of the equipment can be polished with any polish
approved for wooden surfaces. Spray, or pour, the polish onto a soft cloth
and be careful not to get it onto other surfaces.
•
The table top material may stain if it is subjected to prolonged exposure of
dark liquids and chemicals. If a mild solution does not remove the stain, the
top will need to be re-surfaced by sanding and polishing with an approved
compound of 1200 grit polish or finer.
•
Water spills or condensation should be removed immediately from surfaces.
PERMISSIBLE ENVIRONMENTAL CONDITIONS
Temperature
50° (10°C) to 100° (38°C)
-20° (-29°C) to 135° (57°C)
Easily push the work surface the whole way back
allowing access to the drawer and your supplies.
Humidity
20% to 60% RH
20% to 95% RH
Atmospheric Pressure
98 to 150 kPa
98 to 150 kPa