Summary of Contents for OAKWORKS Clodagh Trolley
- Page 1 Clodagh Trolley Oakworks Trolley ASSEMBLED BY HAND IN THE www.oakworks.com 717.235.6807...
-
Page 2: Symbol Identification
WARNINGS/SYMBOL IDENTIFICATION WARNINGS Improper use of this device can cause injury. Be sure to read all operating instructions prior to use. Electrical Shock Hazard. The outlet strip is mounted inside the lower cabinet.. Excessive steam and or water can damage your trolley. Top must be open when using stone warmer. -
Page 3: Product Description
PRODUCT DESCRIPTION PRODUCT Sliding top DESCRIPTION Drawer with work Control surface/cover Access (accessory items not included.) Panel Adjustable/removable Outlet shelf & hardware. Power Strip (accessory items not included.) SPECIFICATIONS DIMENSIONS Trolley Dimensions with top closed: 27 1/8” L x 18” W x 34 ½” H Trolley Dimensions with top open: 49 3/4”... -
Page 4: Directions For Use
DIRECTIONS FOR USE OPERATING SLIDING TOP Be sure to read all cautions, warnings and instructions given in the manual to prevent injury to both operator and client. CAUTION Do not operate hot stone warmer with Trolley top To open, grab the top by the edges To close, just slide the top halves closed. - Page 5 DIRECTIONS FOR USE INSTALLING OPTIONAL HOT TOWEL WARMER Open the cabinet doors & remove the adjustable shelf & pins. Reverse installation instructions on page 4. CAUTION Keep Trolley doors open when towel cabi is in use. CAUTION 1. Set the warmer on the floor in 2.
-
Page 6: Product Information
PRODUCT INFORMATION OPERATING DRAWER WITH WORK SURFACE Pull the work surface the Easily push the work surface the whole way back whole way out to conceal allowing access to the drawer and your supplies. your supplies and for extra working space. HOW TO CARE FOR YOUR TROLLEY •... -
Page 7: Electrical Specifications
ELECTRICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS North America Europe/UK Designed For: Electric Service 120V/15A/60Hz 220V/10A/50Hz Operating Voltage 120 VAC 220 VAC Power 1800 watts 1800 watts Consumption Max. Electric Shock Protection Class I Equipment Class I Equipment PLUG IDENTIFICATION Part #: Voltage (AC) Power Cord Plug ®... -
Page 8: Contact Information
Notice The information contained in this document is subject to change without notice and should not be construed as a commitment by Oakworks®, Inc. Oakworks®, Inc. assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of...