Subscribe to Our Youtube Channel
Related Manuals for Caputron ActivaDose II tDCS
Summary of Contents for Caputron ActivaDose II tDCS
- Page 1 For directions on how to use the Caputron Universal Strap, please visit our instructional video on YouTube. For a list of electrode placement montages, please visit our website for a list of party montage sources. Caputron.com...
- Page 2 Confirm tDCS sponge electrodes are properly set up and saturated with saline solution. The “bump” of the lead cable port on the conductive carbon rubber insert should be facing away from the sponge insert. Refer to the “sponge electrode maintenance” section of the user manual for more information. Step 2 Connect lead cables to tDCS sponge electrodes and output jack of Activadose II tDCS Unit. Note. Red Anode ( + ) Black Cathode ( - ) Step 3 Position tDCS sponge electrodes in the desired montage location using the Caputron Universal Strap. Step 4 Press the “Dose/Power” knob to turn on the unit. Step 5 Select dose by rotating “Dose/Power” knob. Dose represents the value of current (in mA) x time (in minutes). When using the device for tDCS, the dose will be the timer. Ex. 4 mA x 10 min = 40 mA-min (dose), 2 mA x 20 min = 40 mA-min (dose), 2 mA x 40 min = 80 mA-min (dose)
Need help?
Do you have a question about the ActivaDose II tDCS and is the answer not in the manual?
Questions and answers