Technical Specifications - UNISource Corporation FC-8300 Operation Manual

1-2. Technical Specifications

INPUT A CHARACTERISTICS
• FREQUENCY RANGE : 0.1Hz to 100MHz (DC Coupled)
• SENSITIVITY
• COUPLING
• IMPEDANCE
• ATTENUATOR
• LOW PASS FILTER
• TRIGGER LEVEL
<FC-8150U, FC-8030U only>
• • • • SLOPE
< FC-8150U, FC-8030U only>
* NOTE: Trigger error is typically ±0.3% of reading by the number of cycles
averaged for input signals having better than 40dB S/N ratio and greater than
100mV amplitude.
• • • • RESOLUTION AND NUMBER OF DISPLAYED DIGIT
Time Base Selector
Gate Time
Number Of Displayed Digit
Frequency (Input A,B)
• ACCURACY
• PERIOD RANGE
• DISPLAY
• TOTAL RANGE
• RPM RANGE
<FC-8150,FC-8030,FC-8300 only>
1.800.561.8187
30Hz to 100MHz (AC Coupled)
: 0.1Hz to 100MHz: 30mV
: AC or DC Selectable
: 1 M Ω Resistance, Shunted by < 40pF
: x 1 or x 10 Switch Selectable
: -3dB Point of 100KHz, Switch Selectable
: + 350mV to - 350mV (PRESET 0V)
: Positive or Negative Slope Switch Selectable
INT
0.1 Hz-0.99 Hz
10 uHz
1 Hz-9.9 Hz
0.1 mHz 10 uHz 10 uHz
10 Hz-99 Hz
1 mHZ
100 Hz-999 Hz
10 mHz 1 mHz
1 KHz-9.9 KHz
0.1 Hz
10 KHz-99 KHz
1 Hz
100 KHz-999 KHz
10 Hz
1 MHz-9.9 MHz
100 Hz
10 MHz-99 MHz
1 KHz
100 MHz
10 KHz
: ± Time base Error ± Resolution(Table 1)
: 10 nS to 10 S
: n. u. m., Sec with decimal point
: DC to 30 MHz
CAPACITY : 0 to 999 999 999
OVER FLOW : "OF"
: 6 to 600 x 10
www.
EXT INT EXT
0.01S 0.1S
5 6 6 7
RESOLUTION
1 uHz 1 uHz 0.1 uHz 0.1 uHz 10nHz
1 uHz
0.1 mHz 0.1 mHz 10 uHz
1 mHz 0.1 mHz 0.1 mHz 10 uHz
10 mHz 10 mHz 1 mHz
0.1 Hz 0.1 Hz 10 mHz 10 mHz 1 mHz
1 Hz 1 Hz 0.1 Hz
10 Hz 10 Hz 1 Hz
100 Hz 100 Hz 10 Hz
1 KHz 1 KHz 100 Hz
7
RPM , OVER FLOW : "OF"
6
.com
INT EXT INT
1S 10S
7 8 8
10nHz 1nHz
1 uHz 0.1 uHz 0.1 uHz 10nHz
10 uHz 1 uHz 1 uHz 0.1 uHz
10 uHz 1 uHz
1 mHz 0.1 mHz 0.1 mHz 10 uHz
1 mHZ 0.1 mHz
0.1 Hz 10 mHz 10 mHz 1 mHZ
Hz 0.1 Hz 0.1 Hz 10 mHz
10 Hz 1 Hz 1 Hz 0.1 Hz
100 Hz 10 Hz 10 Hz 1 Hz
information@itm.com
EXT
9