Current Technology ISM Series Installation, Operation And Maintenance Manual page 4

CURRENT TECHNOLOGY ISM
®
Guide to Installation &
Assistance
(Continued)
tnbpowersolutions.com/current_technology
INTEGRATED SUPPRESSION MODULE
TM
The ISM offers a full range of monitoring options when connected to an
optional monitoring package from the most sophisticated power quality
monitoring features offered in any surge suppression product . These features
include the following:
• Display of true RMS phase voltages
• Display of neutral-to-ground voltage
• Counting of swells, surges, sags and outages
• Display of percent available protection remaining
The Integrated Suppression Module incorporates individual thermally fused
and protected MOVs, thus preventing individual component failure from
rendering the protection mode useless . Instead, the failed component safely
removes itself from the circuit and all remaining protection is allowed to
continue operating as designed .
W A R N I N G !
HAZARDOUS VOLTAGES PRESENT: Improper installation or
misapplication may result in serious personal injury and/or damage
to electrical systems. Read the complete installation instructions
before proceeding with installation. Remove all power to the
electrical panel before installing or servicing the surge protective
device (SPD).
W A R N I N G !
IMPORTANT SAFETY INSTRUCTIONS: All work must be performed
by licensed and qualified personnel. The electrical system must be
properly grounded in accordance with the U.S. National Electrical
Code, state and local codes or other applicable codes for this SPD
to function properly. This device is suitable for installation where the
available short circuit current is 200,000 rms symmetrical amperes
at 600VAC or less.
4