Sony SDM-N80 Marketing Operating Instructions Manual page 6

Tft lcd color computer display
Hide thumbs Also See for SDM-N80 Marketing:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Media engine
Rear
AC IN
INPUT 1
AUDIO IN
INPUT 2
ANALOG
DIGITAL
AUDIO IN
SYSTEM
CONNECTOR
(TO DISPLAY)
qg AC IN connector (page 8)
This connector provides AC power to the monitor.
qh HD15 (analog RGB) input connector (INPUT1)
(page 7)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and SYNC signals.
qj DVI-I (digital/analog RGB) input connector (INPUT2)
(page 7)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) with sync signals or digital RGB video signals that
comply with DVI Rev. 1.0. You can switch between digital
RGB signals and analog RGB signals with the digital/analog
select switch wa.
qk SYSTEM CONNECTOR (TO DISPLAY) (page 8)
This connector outputs signals to the display when the display
and the media engine are connected with a system connecting
cable.
ql AUDIO IN jacks (pages 8, 18)
These jacks input audio signals when connected to the audio
output jack of the computer or other audio equipment.
w; USB (Universal Serial Bus) upstream connectors
(pages 9, 17)
These connectors are used to connect the monitor to USB
compliant computers.
6
Front
*
wa Digital/analog select switch (page 7)
When connecting the DVI-I input connector qj to a computer
equipped with an HD15 (analog RGB) output connector using
the DVI-HD15 (analog RGB) video signal cable (supplied),
set this switch to ANALOG.
When connecting it to a computer equipped with a DVI
(digital RGB) output connector using a DVI-DVI (digital
RGB) video signal cable (not supplied), set this switch to
DIGITAL.
The switch is set to ANALOG as the default setting.
ws AC power switch (page 8)
This switch turns the monitor on and off.
wd AC power indicator (page 19)
This indicator lights up in green when the media engine is
turned on. The indicator lights up in red when the display is
turned off with the media engine on. The indicator lights up in
orange when the monitor is in the power saving mode.
*
This connector is used by service personnel only. Do not
connect anything to this outlet.

Advertisement

Table of Contents
loading

Table of Contents