MTX THUNDER SPORTS AWMC3 Owner's Manual page 31
Polaris rzr dash kit (for use with mtx wet-mc3 head unit), all-weather media controller with 3" display, polaris rzr dash speakers
Hide thumbs
Also See for THUNDER SPORTS AWMC3:
- Owner's manual (17 pages) ,
- Owner's manual (12 pages) ,
- Manual (80 pages)
Advertisement
Step 6- Place the left and right pods in their perspective locations. Wiring will be orientated
toward the center of the machine. The left pod is slightly larger than the right
pod.
Run the wire
through the small opening between the body panel and the roll cage
.
Make sure to not pinch or
damage the wire. The wire can be reached
from
the inside of the body panel through the dash
cover
opening.
Step 7- Connect the wires to your amplifier ensuring correct polarity
positive-to-positive(+/+
) and
negative-to-negative(-/
-). The wires included use a male and female bullet connector for a quick and
solid connection. Use corresponding bullet connectors for the best
connection.
Test to make sure the
amplifier connections are solid before bolting the enclosures on to the
vehicle.
MTX.COM
5
Advertisement
