Related Manuals for eyecloud.ai eyecloudCam
Summary of Contents for eyecloud.ai eyecloudCam
-
Page 1: Table Of Contents
1. What’s Inside 1. Ways to Place your eyecloudCam 2. Camera Information 2. Recommended Surfaces 3. Battery Level 3. How Not to Use your eyecloudCam 4. LED Status 4. Adjust the Monitoring Range II. Set-Up eyecloudCam 1. Charge your eyecloudCam 2. -
Page 2: Eyecloudcam General Information
I. eyecloudCam General Information 1. What's Inside eyecloudCam magnetic mount stickers type-C USB cable mounting screws 2. Camera Information Lens Microphone Speaker Charging Port Function button/Indicator blue light Rectangle magnetic area... -
Page 3: Battery Level
3. Battery Level 3.1 eyecloudCam App Check the battery level via: App -> Camera -> Settings -> Camera Info -> Battery Level 100%-81% 80%-61% 60%-31% 30%-16% all functions supported all functions supported all functions supported ota update not allowed <... - Page 4 PAIRED NOT PAIRED < < Low battery ( 15%) Low battery ( 15%) LED is off when you press the LED blinks for 3 seconds when button. you press the button. The following functions are The following functions are blocked: blocked: Saving a Notification Saving a Notification...
-
Page 5: Led Status
4. LED Status When being When in Stand-by When pairing the charged Mode or Hibernate camera to the App Mode Hold the button for 5-8 seconds. When the blue light blinks once, the camera is ready to pair. When triggered When upgrading When low on battery NOT PAIRED... -
Page 6: Set-Up Eyecloudcam
II. Set-Up eyecloudCam 1. Charge your eyecloudCam Voltage: < < 4.75 5.25 Current: > Get the camera out of the box. Get the USB Cable from the package Open the rubber cover of the Data Interface on the Camera Body. -
Page 7: Sync The Device With The App
Click the field. 2. Enter your wi-fi network name and password. Please scan the QR Code on your App using your eyecloudCam. “Next”. 3. Click 4. Hold the function button on the front of Connect the camera ( ) for 5-8 seconds and then release it to wake on the device from stand-by mode. -
Page 8: Detection Modes
QR Code successfully scanned. “QR code successfully 8. After hearing scanned”, press ‘Next’ on the App to config- Camera Configuration Camera Configuration ure your device 9. Wait for a few seconds to connect. Next 4. Detection Modes “Settings” 1. On your app, click the button underneath the camera placeholder. -
Page 9: Share With Family
5. Share with Family Devices Camera Settings Alerts Settings Photo-Audio Device Reset “Settings” 1. On your app, click the button underneath the camera placeholder. Watch Together Capture Region Sys Upgrade Info “Watch Together” 2. Click the button. Unbind Camera 3. Click the QR Code icon in the “Scan Guest Sharing QR Code”... -
Page 10: Place And Mount Eyecloudcam
III. Place and Mount eyecloudCam 1. Ways to Place your eyecloudCam 1.1 Horizontal surfaces Place the camera on any horizontal surface. That's about that. 1.2 Vertical Walls Use Sticker Use Screws Use Magnet Mount... -
Page 11: Recommended Surfaces
Use Sticker Use Screws Use Magnet Mount 1.3 Roofs and Ceilings 2. Recommended Surfaces Sticker Screws Magnet Mount Usually those surfaces Drillable Surfaces Magnetic Surfaces that you don’t want to drill through. Wood Interior walls Furniture Exterior walls (cement, bricks) Tile etc. -
Page 12: How Not To Use Your Eyecloudcam
Use your eyecloudCam 3.1 In front of windows 3.2 Too far from a router The camera cannot properly detect events Place your eyecloudCam in the proximity of a through glass. wireless router. 4. Adjust the Monitoring Range Rotate the...
Need help?
Do you have a question about the eyecloudCam and is the answer not in the manual?
Questions and answers