Balboa EL Series Quick Reference Manual

EL Series - Mach 3
MLM990H Quick Reference Guide
Initial Start-up
When your spa is first actuated, it will go into Priming
mode. Please see the M-7 Installation Instruction Manual for
complete instructions on Power-up and Pump Priming.
The Priming mode will last for up to 4 minutes and
then the spa will begin to heat and maintain the water
temperature in Standard mode. Follow the on screen
instructions. Make your choice, then press Select (
If left alone, the system will resume after 4 minutes.
The Home display screen will then appear after completion.
To Navigate
The front panel ring designates Up
Left
Setting the Time
"Home" > Set >
Arrow
Arrow Left
Arrow
Arrow Up
Arrow
Arrow Right
Repeat to change AM/PM. To Save and Exit:
Arrow Down
Select
Setting the Spa Temperature Using Fast Keys
To exit a menu,
From Home display screen, highlight "Fast Keys". Press
Arrow Left
Set the spa temperature with
Fast Keys Give Quick Access to System Set-up
Fast Keys quickly shows status and allows control of a
device. (See User's Manual: "Fast Keys--Programming".)
From the Home display screen, select
"Fast Keys", then
represents the four directional keys.
). Pressing the designated arrow key
will turn the function to Hi/Med/Low
or On/Off. Press
, Right . chooses menu selection.
> Time of Day >
or to select "Time of Day". Then
or to change hour.
to select minutes. Press
. The circle
to exit.
, Down ,
.
.
or to change.
.
or , then to Home.
98°F
Jets 1 L
Home
.