Epson 4800 Use Instructions page 2

7. After filling a cartridge with ink, the funnel can be rinsed with water, air dried and used for later refilling. If the funnel stains and can't be
cleaned to a "new" condition, this will not contaminate your inks. However, introducing even small amounts of ink from one color bottle into
another color bottle will contaminate your inks, so be careful of this.
Color Ink Users:
Match label on the ConeColor Pro or Ink-Thrift (dye) ink bottles, cartridge color label and printer's ink position label.
Gently shake the ink cartridge every few weeks to keep pigment in suspension and printing full density, as pigment inks settle over time. ConeColor
Pro specific ICC color profiles should be used to get the highest quality output with ConeColor Pro inks, which can be downloaded from here:
shop.inkjetmall.com/About/ICC-Profile-Libraries/
custom ICC profiles for papers not already profiled.
Piezography Ink Shade Placement:
This table applies to Piezography ink, make sure to follow the shade placement chart for the specific setup you're using.
Shade 1 is the darkest (black) and Shade 7 is the lightest. For easy refilling (and to avoid accidental mis-filling carts with the wrong ink), we
recommend writing the ink and shade # on the side of each cartridge, following the chart below.
Note: For Piezography gloss printing, Photo Black, Gloss Overprint, and glossy curves must be used. Contact Inkjetmall for more information or to
have a custom Piezography curve made.
11/21/2016
along with instructions for printing with a color ICC profile. Contact Inkjetmall to purchase
© Vermont PhotoInkjet
Insert# 101
http://
Page ! of ! 2 5