Advertisement
Quick Links
TBS CROSSFIRE Diversity Nano RX
Quickstart Guide
The CROSSFIRE Diversity Nano RX is the TBS CROSSFIRE Diversity 8ch RX in a nano package. Next level
reliability and range in a form factor that will blow minds.
The small size allows you to save space and weight, while still retaining the key features that make the
CROSSFIRE system flexible and reliable.
Key features:
●
Super compact, only 24 x 18 mm (1.8g)
●
Same feature set like TBS CROSSFIRE DIVERSITY RX receiver (Redundant RF stages, 1s backup
battery circuitry for RF beacons, SBUS, CRSF, SmartAudio, MAVLInk, Serial Bridge, FLARM)
●
Telemetry support
Full range receiver
●
●
5V voltage input
2.54mm pitch front connector and 2mm pitch side connector
●
Note:
*** Firmware 2.87 or newer required! ***
How to:
U pdate TX
/
U pdate
RX
1
L ast rev: 2018-12-05
Advertisement
Summary of Contents for TBS CROSSFIRE Diversity Nano RX
-
Page 1: Quickstart Guide
L ast rev: 2018-12-05 Quickstart Guide The CROSSFIRE Diversity Nano RX is the TBS CROSSFIRE Diversity 8ch RX in a nano package. Next level reliability and range in a form factor that will blow minds. The small size allows you to save space and weight, while still retaining the key features that make the ... - Page 2 Wiring receiver The receiver does not come with any connectors on-board, this is with intention to allow for flexible and more varied setups, i.e. it is easier to add a connector than to remove a pre-soldered one. Use normal servo-wires to either connect directly to the soldering pads/vias or use 2.54mm pin header to mount it to a motherboard.
- Page 3 BST connectivity The TBS CROSSFIRE Diversity Nano RX comes with a fully featured BST port. To connect it to other devices like TBS CORE PRO, FPVision layer, GPS or other TBS peripherals, a custom cable needs to be made. BST ...