Audio/Video Cable (Av Cable) - Sony VRD-MC6 Operating Instructions Manual

Audio/video cable (AV cable)

1
Turn on the video device.
b Note
• For the camera, make sure that the AC power cord is connected to the AC adapter.
2
Operate the video device to start playback of video.
• Playback operation differs among video devices. For most cameras, switch the power/mode button to
playback, PLAY/EDIT or VTR mode to play video or perform recording. Cameras with multiple
media require specifying the media (HDD, "Memory Stick Duo," 8cm disc, or Built-in memory). For
details, refer to the operating instructions of your video device.
• The [A/V t DV OUT] setting on Handycam
setting).
3
Connect the video device to the DVDirect.
Use an audio/video cable (not supplied) or AV cable (not supplied) when connecting a
video device to the DVDirect.
z Hint
• Connectors may differ between devices. Refer to the operating instructions for your device, and use an
appropriate cable.
For audio/video cables:
34
To AUDIO/VIDEO OUT
connectors
Audio/video cable (not supplied)
®
(DV/D8) must be set to [OFF] ([OFF] is the default
AUDIO IN connectors
VIDEO IN connector