Operation - DeWalt DXCM024-0348 Instruction Manual

COMPRESSOR HOOK-UP
The hose reel includes a 3/8" x 3' lead-in hose for hooking up the
hose reel to your air source. Apply Teflon tape to the male threads
of the lead-in house and thread the non swivel end into the air hose
inlet (C). Thread and connect the other end into your air source.
Attach air tool or accessory to the air outlet of the air hose in the
hose reel.

OPERATION

This hose reel features a manual brake pin lock feature to secure air
hose after length is set. or allow it to rotate freely.
FREE ROTATION HOSE REEL
Before extending the air hose or
rewinding the hose back onto the hose
reel, pull the pull ring of the manual
brake pin completely out and turn either
clockwise or counter-clockwise 90
degrees for free rotation.
LOCKED HOSE REEL
To lock the hose reel, extend the hose to
the desired length, pull the pull ring of
the manual brake pin completely out
and turn either clockwise or counter-
clockwise 90 degrees to have the pull
ring become seated in one of the three
holes on the hose reel drum. Turn the
hose reel drum slightly to have the
manual brake pin drop into place.
WARNING: Always disconnect the hose reel from air source
after operation.
WARNING: Always disconnect air tool or accessory attached to
the hose reel from air supply before making any adjustments and
changing accessories.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement.
8
WALT for a free
E