Table of Contents
Advertisement
Quick Links
Configuration tool with screen
1.USE
Using this infrared configuration tool the user can, without touching the
device:
- set the parameters of SCS and KNX self-contained sensors, dynamic
light strips and SARLAM bulkhead lights (time delay, daylight setpoint,
detection sensitivity, etc.)
- adjust, correct, debug the system according to the characteristics of the
installation location and customer requirements
- save the settings (maximum of up to 26 configuration files)
- duplicate onto other sensors (copy/paste a typical setting)
2. TECHNICAL CHARACTERISTICS
Infrared communication technology (4 m max.)
In the direction of the product to be measured
At a maximum angle of +/-15° in the axis of the IR transmission and
reception LED (see figure)
4 m
+/- 15°
Backlit screen (automatic switch-off)
Weight: 71 g
Impact resistance: IK04
Operating temperature: -5°C to +45°C
Storage temperature: -20°C to +70°C
Recharging: Use a mini USB cable (not supplied) to recharge the
configuration tool via a standard USB socket.
Note: Updating software is available on our website
Technical data sheet: F01163EN/01
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88
www.legrand.com
4 m
+/- 15°
Updated: 30/03/2015
CONTENTS
Use
1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Technical characteristics
2.
3.
4.
Standard EN12464-1
5.
recommendations
6.
Standards
7.
2. TECHNICAL CHARACTERISTICS (CONTINUED)
Display screen
On/Off and OK
Control and navigation
keys
Works with all factory pre-set compatible sensors (infrared, ultrasound
or dual technology) with dynamic light strips and SARLAM bulkhead
lights.
After fully interrogating the device, only the parameters concerning this
device appear.
Catalogue number(s): 0 882 30
. . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
. . . . . . . . . . . . . . . . . . . . .7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
IR transmission
and reception LED
Function access
keys
Mini-USB
connector
Created: 07/07/2010
Page
1/8
Advertisement
Table of Contents
Related Manuals for LEGRAND 0 882 30
Summary of Contents for LEGRAND 0 882 30
- Page 1 Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 www.legrand.com Configuration tool with screen Catalogue number(s): 0 882 30 CONTENTS Page ........1 Technical characteristics .
- Page 2 Configuration tool with screen Catalogue number(s): 0 882 30 3. NAVIGATION 3. NAVIGATION (CONTINUED) 3.1 Pictograms 3.2.2 Parameter selection Sensor parameters Advanced mode The 4 buttons control the pictogram functions Files displayed above Sensor PnL Back to previous page...
- Page 3 Configuration tool with screen Catalogue number(s): 0 882 30 3. NAVIGATION (CONTINUED) 3. NAVIGATION (CONTINUED) IR only: The sensor needs IR technology in order to switch on the load. Standby level Standby time US only: The sensor needs US technology in order to switch on the load.
- Page 4 Configuration tool with screen Catalogue number(s): 0 882 30 3. NAVIGATION (CONTINUED) 3. NAVIGATION (CONTINUED) 3.2.5 Sensor PnL Light regulation Principle: Light regulation distinguishes between the available natural Sensor PnL light and the provision of artificial light. Sensor parameter...
- Page 5 4. UPDATING 4.1 Installing the software Connect to the website www.legrandoc.com Click on Yes Enter product catalogue number 0 882 30 Select the desired language then click OK then click OK The page concerning the available product documentation is displayed...
- Page 6 Configuration tool with screen Catalogue number(s): 0 882 30 4. UPDATING (CONTINUED) 4. UPDATING (CONTINUED) Click on Next after accepting the licence contract terms This window is used to display the progress of the software installation Click on Browse to indicate the destination directory Select "Install this driver software anyway"...
- Page 7 Configuration tool with screen Catalogue number(s): 0 882 30 4. UPDATING (CONTINUED) 4. UPDATING (CONTINUED) Alert window warning that some data may be lost. Select Continue to Select the application start updating. Eg: Lighting management Updating is complete. Connect the configuration tool to the PC Note: All technical information is available on 5.
- Page 8 Configuration tool with screen Catalogue number(s): 0 882 30 6. CARE Do not use: acetone, tar-removing cleaning agents or trichloroethylene. Resistant to the following products: - Hexane (En 60669-1) - Methylated spirit - Soapy water - Diluted ammonia - Bleach diluted to 10%...