Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vremi VRM010637N
Summary of Contents for Vremi VRM010637N
- Page 1 Moisture Manager Heavyweight (70 pt) Moisture Manager Lightweight (30 pt)
- Page 2 BEFORE FIRST USE: To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their journey. Please leave it standing upright and outside the box for 24 HOURS before plugging it in.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Important Safety Instructions Parts Description Operation Care & Cleaning Troubleshooting Warranty Warning Drop Us A Line... -
Page 4: Important Safety Instructions
23. If water enters the dehumidifier, turn the dehumidifier off and 10. Make sure to turn off and unplug the dehumidifier before disconnect the power, contact Vremi Customer Service at cleaning. 646-490-9904 to avoid a hazard. 11. Do not use the dehumidifier near flammable gas or 24. -
Page 5: Important Safety Instructions
Arrange cord away from traffic area and where it will not be tripped over. - If the supply cord is damaged, it must be replaced by Vremi. Please contact Vremi Customer Service at 646-490-9904 for a - Do not operate dehumidifier with a damaged cord or plug. -
Page 6: Parts Description
Parts Description FRONT REAR Control Panel Handle (both sides) Air Outlet Grille Panel Air intake Grille/Air Filter Drain Hose Outlet Bucket Water Level Window Power Cord Buckle (placed in bucket) Caster Power Cord Power Plug ACCESSORIES Pump Drain Hose ( 1pc ) Power Cord Buckle ( 1pc ) Threaded Female End ( 1pc ) (only for the dehumidifier with pump feature) -
Page 7: Operation
Operation will automatically start after three (3) minutes. setting automatically when the power resumes. NOTE: All illustrations in this manual are for explanation purposes only. Your dehumidifier may be slightly different. Contact Vremi Customer Service at 646-490-9904 for details. - Page 8 Operation CONTROL PANEL FILTER button • For drier air, press the button and set to a lower The check filter feature is a reminder to clean the Air percent value (%). Filter for more efficient operation. The Filter light (clean For damper air, press the button and set a higher filter light) will illuminate after 250 hours of operation.
- Page 9 Note: When one of the above malfunctions occurs, turn off the dehumidifier and check for any obstructions. Restart the dehumidifier, if the malfunction is still present, turn off the dehumidifier and unplug the power cord. Contact Vremi Customer Service at 646-490-9904 for repair and/or replacement.
-
Page 10: Care & Cleaning
- Store the dehumidifier upright in a dry, well-ventilated place. Troubleshooting Before calling Vremi customer service, review this list. It may save you time and expense. This list includes the most common occurrences that are not the result of defective workmanship or materials in this dehumidifier. -
Page 11: Warranty
If you experience an issue with a Vremi product, please contact us at support@vremi.com or (646) 490-9904, and we will do our best to resolve it for you.
Need help?
Do you have a question about the VRM010637N and is the answer not in the manual?
Questions and answers
How do u change filter
To change (clean) the filter on the Vremi VRM010637N:
1. Wait until the Filter light turns on after 250 hours of operation, indicating it's time to clean the filter.
2. Turn off the dehumidifier and unplug it from the wall outlet.
3. Remove and clean the air filter with water.
4. After cleaning, reinstall the filter.
5. Press the Filter button to reset the Filter light.
This maintains efficient operation.
This answer is automatically generated
My Vremi dehumidifier is only a few years old. The Fan continually runs but the dehumidifier function doesn't work. After several hours of running there is nothing in the drain bucket. I've tried everything to remedy the situation, but nothing helps. Do you have any suggestions??
If the Vremi VRM010637N dehumidifier has a running fan but is not collecting water, follow these troubleshooting steps:
1. Make sure the dehumidifier’s plug is inserted completely into the wall outlet.
2. Check that the unit is placed upright on a level floor surface.
3. Ensure the bucket is properly installed and the back drain plug is securely in place if not using a hose.
4. Confirm that the air filter is clean, as a clogged filter can reduce performance.
If the issue continues after checking these steps, contact Vremi Customer Service.
This answer is automatically generated