Table of Contents
Advertisement
Notice to the user
Government law prohibits the operation of unlicensed radio transmitters within
the territories under government control.
Illegal operation is punishable by fine or imprisonment or both.
THANK YOU
We are grateful you choose BelFone series professional radio
communications products!
Since 1989, BelFone has been always engaging in research and exploration of
radio communications technologies, In order to lead intelligent technologies in
the industry. We still make every effort to research and design products
according to modern complicated communications environment, and we offer
complete and customized communication solutions to clients. Our products will
satisfy you because of its excellent performance and outstanding
communications strength. No matter what field you are in. You will be Satisfied
with the radio.
VHF/UHF digital FM transceiver model: BF-TD516
Warning！
◆In explosive atmospheres(inflammable gas, dust particles, much powder
area，etc.),Please turn the power off.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BelFone BF-TD516
Summary of Contents for BelFone BF-TD516
- Page 1 We are grateful you choose BelFone series professional radio communications products! Since 1989, BelFone has been always engaging in research and exploration of radio communications technologies, In order to lead intelligent technologies in the industry. We still make every effort to research and design products according to modern complicated communications environment, and we offer complete and customized communication solutions to clients.
- Page 2 ◆If you want to use the machine for secondary development, please contact with BelFone’s technical engineer or dealer for technical assistance; ◆Please keep the surface of radio is clean and dry, clean the radio using a...
-
Page 3: Table Of Contents
Content Supplied Accessories......................... 4 Installation of Accessories ........................ 5 Getting Acquainted ......................... 10 Basic Operation ..........................12 Turning the power on /off ....................... 12 Adjusting the volume ......................12 Selecting a Channel ......................... 12 Selecting a Zone ........................13 Dual Modes Switching ......................13 Call ............................ -
Page 4: Supplied Accessories
Supplied Accessories Notes: The accessories listed below are covered by BelFone dealer、authorized BelFone agents or factories . After carefully unpacking the transceiver, identify the items listed in the table below. If any items are missing or have been damaged during shipment please contact with dealer immediately. -
Page 5: Installation Of Accessories
Installation of Accessories Installation/ removing the antenna Hold the supplied antenna by its base, then screw it into the connector on the top panel of the radio until fasten. Turn the antenna anti-clockwise to remove it. Installation/ removing the belt clip Attach the belt clip using the two supplied3*7mm binding screws. - Page 6 Attaching/Removing the Strap Thread the hand strap to the loop back of your two-way radio. Attaching/Removing the Battery...
- Page 7 Warning！ 1. Don’t short-circuit the battery, it may cause the battery damaged or burst into flame; 2. Never attempt to remove the casing from battery, that avoid to short the battery terminal; 3. Battery is flammable objects, don’t throw it into fire or don’t use it on dangerous area. ...
- Page 8 Applicable Battery To reduce the risk of injury, please only use the battery and charger specified by Belfone, other batteries may burst, causing bodily injury and property damage. Battery Tips 1. When charging your battery, keep it at a temperature among 5℃—40℃.
- Page 9 Battery Storage 1. Fully charge a battery before you store it for a long time, to avoid battery damage due to over-discharge. 2. Recharge a battery after several months’ storage, to avoid battery capacity reduction due to over-discharge.(NI-MH batteries:3 months, Li-Ion& Li-polymer batteries: 6 months) 3.
-
Page 10: Getting Acquainted
The LED indicator of charger also will not light. Attaching the Speaker/Microphone Open the accessory port cover, then align the plug with the accessory port and tighten the screw on the plug. Getting Acquainted Channel Selector Knob ①... - Page 11 Turn the knob to select channel 1-16. Power switch/volume adjust keys ② Turn clockwise to switch the radio power on, when the radio is turned on, rotate clockwise to increased volume, counter- clockwise to decrease the volume. Turn counterclockwise fully to switch the radio off. LED Indicator ③...
-
Page 12: Basic Operation
Connect to optional speaker/MIC and programming cable. Basic Operation Turning the power on /off Rotate the power switch/volume adjusting keys clockwise to turn the power on. Rotate the power switch/volume adjusting keys anti-clockwise to turn the power off. Adjusting the volume After the radio is power on, you can rotate the power switch/volume adjust keys to adjust the volume level, rotate the knob clockwise to increase the volume, or rotate the knob anti-clockwise to decrease the volume. -
Page 13: Selecting A Zone
Selecting a Zone The radio supports up to 2 zones, each with a maximum of 16 channels. You may select a desire zone by setting zone selection function to orange button, button 1 or button 2, then handover zone. While enable all tone alert, select zone will hear a channel number. - Page 14 press PTT key, if is not within hang time to transmit digital call, within the preset time period to call back; To transmit press and hold down the PTT key, LED indication glows red, speak into the microphone, hold the palm microphone approximately 3 to 4 centimeters away from your mouth.
-
Page 15: Receiving And Responding To A Call
Receiving and responding to a call When receiving a call, the LED indicator glows green. On digital channel, while a private call is received, you may press the PTT key within the preset time period to call back; on digital compatible analog channel or analog compatible digital channel, the radio detects both the digital signal and the analog signal (must have a subsonic) when receiving, and locks the corresponding channel mode when a matching signal is detected, you may press the PTT key within... - Page 16 Scan on/off: Allow user to enable or disable the scan function. ● All alert tone on/off: Allow user to enable or disable all alert tones. ● Battery Indication： It’s convenient to know battery capacity. If battery strength ● level is 70%-100%, a “Power High “sounds; if battery strength level is 30%-70%, a “Power Middle”...
-
Page 17: Functions And Operations
effective. Nuisance Delete: While scanning on, If you don’t want to receive activities on ● the channel, press the programmed Nuisance Delete key to remove the channel from the scan list temporarily. When restart scanning, the nuisance channel will return to scan list. Permanent Monitor: Permanent monitor feature is the same as monitor, but ●... - Page 18 longer present. When the signal “ drop out” the radio will remain on the channel momentarily before scan resumes. The delay time is programmed 500 to 10000 milliseconds. Talkback : When a signal is detected on a channel, scan pauses on that ●...
-
Page 19: Auto Scan
Auto Scan If Auto Scan feature is enabled for a channel, the radio will automatically enter scan mode when it is switched to this channel. To stop scanning, press programmed Scan On/Off key or switch to other channels. If return to the channel will enter scan mode directly. -
Page 20: One Touch Call
One Touch Call On digital channel and digital mode compatible channel, one touch call feature contains: to send messages or transmit to a group call contact, to send messages or send call alert and transmit to a private call contact. Group Call ●... -
Page 21: Talk Around
Then the programmed key set as one touch call, press the programmed key to send a message to a private call. Call Alert ● On one touch call menu, the call member select private call contact, and the call type select call alert, then the programmed key set as one touch call, press the programmed key to send call alert to a private call. -
Page 22: Bandwidth
radio located at a close place please select Low power to save battery. Press the programmed High/Low Power key to switch between high power and low power. Switch to high power, a “high power” sounds; switch to low power, a “low power”... -
Page 23: Emergency
Emergency The digital channel and digital analog compatible channel support the emergency alarm function. In case of an emergency you can enter emergency mode to ask for help, short press programmed “Emergency on” key to send emergency information, to exit emergency mode, long press “Emergency off”. On regular type alarm, after send emergency information then receive ACK command or the alarm cycles expire, the radio will exit the emergency mode automatically. -
Page 24: Alone Worker
Polite Retries: Only when the current channel is free, press programmed key ● to send emergency information, number of polite retries can be set as 0 to 14 and endless. Hot MIC Duration: If the emergency mode set as emergency alarm with voice ●... -
Page 25: Voice Encryption
period. If a channel is busy, the time will be shorter. If the preset time expires, the radio will generate beep and terminate transmission automatically. Via programming software, you can set TOT as 15-495 second. Via programmable software to set it: Channels folder → Zone → A digital or analog channel →... -
Page 26: Tone Alerts
level will be higher, when the environment is quiet, VOX level will be lower. It allow user to set VOX delay as 500 to 10000 milliseconds. If the VOX level is set as off via the programming software, press programmed VOX on/off key can’t enable VOX feature, if the VOX level is set as 1 to 8, press programmed VOX on/off key can enable or disable VOX feature Via programmable software to set it: General Settings folder →VOX level→... -
Page 27: Reject Stranger Call
analog channel), Analog & Digital (the radio gives tone indication for transmission on analog and digital channel), Digital (the radio gives tone indication for transmission on digital channel). Via programmable software to set it: General Settings folder →Tone Alerts → Voice Indication →... -
Page 28: Battery Saver
low-pitched tone will sound. Via programmable software to set it: Channels folder → Zone → a digital channel → TX Parameters → Admit Criteria Analog Channel This feature can restrict the channel if it is already in use you will be unable to transmit. -
Page 29: Lowery Battery Alert
Lowery Battery Alert When your battery gets low, LED indicator glows red and with a warning tone: “Please Charge”，please replace the battery or charge the battery in time. The radio will turn off automatically while battery is too low. Via programmable software to set it: General Setting folder → Tone Alerts → RX low battery interval (sec) CTCSS/CDCSS On analog channel and digital analog compatible channel, you can set unique... -
Page 30: Pc Mode
non-standard code manually as you need. PC Mode At first, connecting the radio with computer by data line then turn on two-way radio; Secondly，start the software（BFP-DH300）that the data will be write or read by users. -
Page 31: Ctcss Standard Frequency Table
CTCSS Standard Frequency Table CTCSS Freq. CTCSS Freq. CTCSS Freq. CTCSS Freq. [Hz] [Hz] [Hz] [Hz] 67.0 94.8 131.8 186.2 69.3 97.4 136.5 192.8 71.9 100.0 141.3 203.5 74.4 103.5 146.2 210.7 77.0 107.2 151.4 218.1 79.7 110.9 156.7 225.7 82.5 114.8 162.2... - Page 32 D065N D065I D263N D263I D565N D565I D071N D071I D265N D265I D606N D606I D072N D072I D271N D271I D612N D612I D073N D073I D306N D306I D624N D624I D074N D074I D311N D311I D627N D627I D114N D114I D315N D315I D631N D631I D115N D115I D331N D331I D632N D632I D116N...
-
Page 33: Specifications
Specifications General Frequency range UHF:400‐480MHz Channel Capacity Zones Channel Spacing 12.5KHz Operating Voltage DC7.4V (±20%) Battery Capacity 1800 mAh Battery Life（5/5/90） Digital 18 Hours Frequency Stability ±1.5ppm Antenna Impedance 50Ω Dimensions (L×W×H) 59.7（L）*35 (W) *114 (H)mm Weight 264g(Including Battery) Transmitter RF Output Power High：5W； ... -
Page 34: Statement
Conducted Spurious Emission -36dBm Environmental Specifications Working Temperature -20℃—+60℃ Storage Temperature -30℃—+85℃ Vibration & Shock MIL-STD-810C/D/E/F Standard Statement Our Company endeavors to achieve the accuracy and completeness of this manual, if you have any question, you can contact with us, we will make a detailed answer to you in time. -
Page 35: Antenna
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the BF-TD516 and is the answer not in the manual?
Questions and answers