Poe Power Max-Value; Poe Power-Management - H3C S7500 Series Command Manual

Command Manual – PoE
H3C S7500 Series Ethernet Switches

1.1.11 poe power max-value

Syntax
poe power max-value max-value
View
System view
Parameters
max-value: Maximum PoE power output on the switch, ranging from 37 to 2,400 in W.
Description
Use the poe power max-value command to set the maximum power output on the
switch.
By default, the maximum PoE power output on the switch is 2,400 W.
Note that this command works only when the power you specify is greater than the
power that has been distributed to the boards.
Examples
# Set the maximum power output of the switch to 2,000 W.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] poe power max-value 2000

1.1.12 poe power-management

Syntax
poe power-management { auto | manual } slot slot-number
View
System view
Parameters
auto: Manages PoE of the switch automatically.
manual: Manages PoE of the switch manually.
slot-number: Number of the slot where the board resides.
Description
Use the poe power-management command to configure the PoE management mode
of the switch.
Chapter 1 PoE Configuration Commands
1-12