SCA SCADDC8 Owner's Instruction Manual page 8

Installing the Dash Cam cont...
1. Ensure windscreen is clean and free of debris. Attach
suction cup to the windscreen and lock into position with
the lever.
2. Fix where the vision is not blocked (Place close to
rear-view mirror is recommended). Don't install device on
an airbag or within its working range.
3. Insert Micro SD card into the Dash Cam
4. Insert Mini USB end of the 12V power adapter into the
Mini USB interface/ charging point of the Dash Cam.
Connect socket end of the adapter into the into 12V
power socket of vehicle.
5. Adjust the mounting bracket and rotate the camera
direction to get the best view. Ensure of the vehicles
bonnet is visible from the bottom of the screen for
alignment for the forward facing camera.
6. Turn vehicles ignition to ON, and the Dash Cam will
power ON and start recording automatically, you will hear
an audible tone once powered.
7. A red circle will start flashing on the top left hand side
of the LCD screen once recording has started. A red timer
will also appear on the right hand side of the LCD screen.
8. For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned
off the Dash Cam will save the current file and turn off.
8