Page 1
Zigen ZIG-ADM 4K UHD+ Dolby Digital & DTS Stereo Decoder 4K 60 Hz 4:4:4 HDCP 2.2 ZigNet, Full Web Interface and System Diagnostics...
Page 2
Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 3
Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen.
Page 4
Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 9:00AM - 5:00PM (PST) Email info@zigencorp.com www.zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 6934 Canby Avenue Suite 107 Reseda CA 91335...
Page 5
Features • HDMI input and output with 18Gbps (600MHz) 4K UHD support • DVI 1.0 compliant with the use of an HDMI-DVI adaptor • HDCP 1.4 and 2.2 compliant • Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit) •...
ZIG-ADM Introduction This 4K UHD HDMI unit with Dolby® Digital/DTS® Stereo Audio Decoder, supports the transmission of high bandwidth (18Gbps) video and allows the associated audio signal to be simultaneously extracted and split to both digital and analog audio outputs, providing high quality audio extraction and video performance.
Front Panel Power LED This LED will illuminate to indicate the unit is ON and receiving power. PCM LED This LED will illuminate when LPCM audio is detected on the HDMI input. If the ARC function is active, this LED will also illuminate when LPCM is detected from the ARC source. dts LED This LED will illuminate when DTS 2.0+Digital audio is detected on the HDMI input.
Back Panel HDMI IN Connect to HDMI source equipment such as a media player, game console or set-top box. HDMI OUT Connect to an HDMI TV, monitor or amplifier for digital video and audio output. L/R OUT Connect to power amplifier for stereo analog audio output. COAX OUT Connect to A/V receiver for digital audio output using an appropriate coaxial cable.