Advertisement
5.
Fit a new bulb into the Attachment Head and insert bulb into socket. Tighten
bulb in socket, and pull Attachment Head away from bulb.
6.
To use the Suction Cup Attachment, attach string to the hole on the edge of
the Suction Cup. The string should be a few feet longer than the pole.
7.
Caution: Very carefully press the Suction Cup into the center of the bulb until
a suction has formed, moistening the Suction Cup beforehand if necessary.
Turn to loosen bulb and remove from socket.
8.
Press a new bulb into the Suction Cup until a suction forms. Insert bulb into
socket and screw into place. Pull on string to release suction.
Parts List and Assembly Diagram
1. Cuff
2. Handle
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 02540
Page 4
3. Wide Attachment
Accessory
4. Narrow Attachment
Accessory
5. Suction Cup
Attachment
Advertisement
