Subscribe to Our Youtube Channel
Related Manuals for Smarteh LPC-2.CH1M
Summary of Contents for Smarteh LPC-2.CH1M
- Page 1 USER MANUAL Longo programmable controller LPC-2.CH1M Card Holder module Version 3 SMARTEH d.o.o. / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0)5 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si...
- Page 2 Longo programmable controller LPC-2.CH1M Written by SMARTEH d.o.o. Copyright © 2017, SMARTEH d.o.o. User Manual Document Version: 3 May, 2017...
- Page 3 24 months is valid from the date of sale to the end buyer, but not more than 36 months after delivery from Smarteh. In case of claims within warranty time, which are based on material malfunctions the producer offers free replacement. The method of return of malfunctioned module, together with description, can be arranged with our authorized representative.
-
Page 4: Table Of Contents
Longo programmable controller LPC-2.CH1M Longo programmable controller LPC-2.CH1M 1 DESCRIPTION...................1 2 FEATURES..................2 3 OPERATION..................3 3.1 Parameters................3 4 INSTALLATION..................4 4.1 Connection scheme..............4 4.2 Mounting frame selection............6 4.3 Mounting instructions..............7 4.4 Module labeling................8 5 TECHNICAL SPECIFICATIONS..............9 6 CHANGES ..................10 7 NOTES..................11... -
Page 5: Description
LPC-2.CH1M reads unique ID (UID) from standard ISO/IEC 14443 A/MIFARE. To achieve most reliable RFID card reading results use Smarteh RFID Mifare cards. RFID Mifare card must be inserted at least 40 mm deep into LPC-2.CH1M card slot in a time period between 1 .. 3 seconds. -
Page 6: Features
Longo programmable controller LPC-2.CH1M 2 FEATURES Figure 1: LPC-2.CH1M. Table 1: Features RFID reader RFID card slot Adjustable LED intensity LEDs for showing activated messages & requests: do not disturb, room service 2 push buttons for activating messages & requests: do not disturb, room service OK “... -
Page 7: Operation
Longo programmable controller LPC-2.CH1M 3 OPERATION Operation of the CH1M module is also dependent on parameters received on RS-485 communication channel. If RFID card is inserted into slot, reader tries to resolve RFID tag code. If code is read successfully, module activates status iIDNew and sends RFID code in iIDW1-iIDW7 status fields. -
Page 8: Installation
Longo programmable controller LPC-2.CH1M 4 INSTALLATION 4.1 Connection scheme Figure 2: Connection scheme... - Page 9 Longo programmable controller LPC-2.CH1M Table 2: K1 K1.1 Ground K1.2 10 .. 24 V DC Power supply input K1.3 RS-485 A Data receive/send line A K1.4 RS-485 B Data receive/send line B Table 3: LEDs & Buttons On: request active...
-
Page 10: Mounting Frame Selection
Master ● Frames of other vendors most probably suits as well, but they were not verified by Smarteh. Before installation verify compatibility of non listed frames. Module housing has a fin on each side, which can be easily removed with knife cutter or pliers. This adaptation enables housing to be build in various frame formats with two different depths. -
Page 11: Mounting Instructions
Mounting instructions: 1. Set the correct RS-485 address (S1 switch) for LPC-2.CH1M (refer to the Table 4). 2. Connect interconnection cable to the connector K1. Max. allowed tractive force is 30 N. 3. Put the LPC-2.CH1M in mounting frames. -
Page 12: Module Labeling
S/N: CH1-S9-1000000003 is the serial number. • CH1 – short product name, • S9 – user code (test procedure, e.g. Smarteh person xxx), • 10 – year (last two cyphers) • 00000003 – current stack number; previous module would have the stack number •... -
Page 13: Technical Specifications
Protection class IP 20 To achieve most reliable RFID card reading results use Smarteh RFID Mifare cards. RFID Mifare card must be inserted at least 40 mm deep into LPC-2.CH1M card slot in a time period between 1 .. 3 seconds. -
Page 14: Changes
Longo programmable controller LPC-2.CH1M 6 CHANGES The following table describes all the changes to the document. Date Description 30.05.17 Technical data update. 23.12.15 Pictures update. 01.06.14 The initial version, issued as LPC-2.CH1M module UserManual. -
Page 15: Notes
Longo programmable controller LPC-2.CH1M 7 NOTES...
Need help?
Do you have a question about the LPC-2.CH1M and is the answer not in the manual?
Questions and answers