Advertisement
The evaluation kit installer loads various software components including the WLAN firmware and user
application binaries for evaluation. The two main types of application binaries installed are Serial to Wi-
Fi and Temperature and Light Sensor Application. The directory structure looks like the figure below.
The Serial to Wi-Fi Application contains multiple example applications. Below is a list of the binaries
and a short description for each
Directory
Web Server Provisioning
Wi-Fi Protected Setup (WPS)
RF Test Binaries
Enterprise Security (EAP)
The Temperature and light sensor application (TLS) is not a serial to Wi-Fi application, but a different
reference application that utilizes the GEPS API's to develop a sensor device. It uses SNMP for configu-
ration and communicates with the GSDemo PC GUI application that is installed by the kit. The TLS di-
P
RELIMINARY
Description
Application with AT command to support embedded WebServer and
Web pages for provisioning. This is the default binary loaded on all
the evaluation boards. The directory also contains binaries for testing
firmware update. (See App Note 39 for Web provisioning steps)
Application with support for AT command to evaluate Wi-Fi Pro-
tected Setup. (See App Note 39 for WPS steps)
Application with support for AT command to do RF testing i.e confi-
guring radio for FCC modes like continuous transmission
Application with support for AT commands for Enterprise EAP types
– EAP-TLS, EAP-TTLS, EAP-FAST
P
7
12
AGE
OF
Serial to Wi-Fi Start Up Guide
C
ONFIDENTIAL
Advertisement
