Advertisement
b. To associate with the GainSpanDemo AP, first enable DHCP client, by typing
"at+ndhcp=1" and then type "at+wa=GainSpanDemo". The evaluation board will re-
ceive an IP address from the Access Point DHCP server.
c. Type at+nstat=? To show the current status of the network connection.
7. Type "AT?" This will list all the supported AT command set so you can develop your applica-
tion using either HOST MCU through the serial interface or HOST PC using the Serial Terminal
Application. See the Serial to Wi-Fi Adapter guide and command reference guide for details on
all the AT command set and a quick list of AT commands respectively.
P
RELIMINARY
Serial to Wi-Fi Start Up Guide
P
6
12
AGE
OF
C
ONFIDENTIAL
Advertisement
