Listening To A Cd Using A Filter (Digital Filter Function) - Sony SCD-XB940 Operating Instructions Manual

Creating Your Own Programme
(Programme Play)Z
Checking the contents of the programme
Before you start playing or while the player is playing,
press CHECK.
Each time you press the button, the track numbers will
appear in the display in the programmed order.
When you press CHECK while the player is playing, the
track number appears from the next track numbers of the
current playing track number.
Changing the contents of the programme
You can change the contents of the programme in stop
mode.
Do the following:
To
1 Press CHECK repeatedly until the track
Erase a track
number you want to erase appears.
2 Press CLEAR.
Press CLEAR.
Erase from the last
Each time you press the button, the last
track in the
track of the programme is erased.
programme
Press ./> to select the track you want
Add a track to the
to add, then press PROGRAM. When using
end of the
the remote, press the number button of the
programme
track to be added.
Hold down CLEAR until "Prog Clear"
Erase all tracks
appears in the display.
18
GB
Listening to a CD Using a
Filter
(Digital Filter Function)
This player is equipped with a variable coefficient (V.C.*)
digital filter. By selecting one of five types of filters
("STD," "1," "2," "3," and "4"), you can adjust the sound
to match your listening environment and the music
source.
*V.C. is a trademark of Variable Coefficient. For details,
see "What is a variable coefficient (V.C.) digital filter?"
Note
Digital filters are effective only when you play a conventional
CD. You cannot select the digital filter when you play a Super
Audio CD.
Press DIGITAL FILTER repeatedly until you locate
the filter you want.
If you press DIGITAL FILTER to change the type of filters
during play, the type of filter appears in the display and
the sound will be interrupted momentarily.
Z
DIGITAL FILTER