Kenwood NX-300S Service Manual page 10

NX-300(S)
■ Assembly information (Sheet/Cushion)
When "Main Parts" is changed (ordered), "Assembled Sheet/Cushion" should also be changed (ordered) together.
The Sticker and Sheet etc are non-reusable parts. It requires the new one to get the radio's performance after repairs.
For example, when "Plastic Cabinet (A02-4116-03)" is changed, "Sticker (B42-7463-04)", "Badge (B43-1645-04)", "Fibrous
Sheet (G10-1806-04)", "Fibrous Sheet (G10-1822-04)" and "Dressing Panel (A21-1664-03)" should be ordered and changed
together because Sticker (B42-7463-04), Badge (B43-1645-04), Fibrous Sheet (G10-1806-04), Fibrous Sheet (G10-1822-04)
and Dressing Panel (A21-1664-03) are non-reusable.
Main Parts
Part Name
Plastic Cabinet
Cord ASSY (50-pin
FPC)
Speaker
Switch Unit (PTT FPC)
Chassis
Terminal Block
10
DISASSEMBLY FOR REPAIR
Part Number Part Name
Sticker
Badge
A02-4116-03 Fibrous Sheet (SP)
Fibrous Sheet (MIC)
Dressing Panel
X42-3380-10 Cushion (50-pin FPC)
Rubber Cushion (SP)
T07-0749-25
Sheet (SP)
Sheet (PTT)
X41-3760-10
Adhesive Sheet
(PTT FPC)
Relay Hardware
(VCO-Chassis)
Sheet (Air)
Rubber Sheet (FET)
A10-4111-21
Sheet (Air)
Cushion (ANT)
Sheet
(Chassis bottom)
Adhesive Sheet
E72-0425-03
(Terminal Block)
Assembled Sheet/ Cushion
Part Number
B42-7463-04 "NXDN" is printed.
B43-1645-04 "KENWOOD" is printed.
G10-1806-04
G10-1822-04
A21-1664-03
G13-2293-04
G11-4272-14
Used for stabilizing the waterproof performance.
G11-4458-14
"•" (a hole) on the Sheet (SP) shows the upper side.
Used for fi xing the Push Knob (PTT) on the Switch Unit (PTT
G11-4428-04
FPC) and stabilizing the waterproof performance.
J99-0711-04 Used for fi xing the Switch Unit (PTT FPC) on the Chassis.
E29-1221-14 Used for stabilizing the shield performance of the VCO.
This sheet is put on the leak check hole.
G11-4500-04
This sheet lets air through, but does not let water through.
G11-4429-04 Used for stabilizing the radiation performance of the FET.
G11-4440-04 This sheet is a protect cover of the sheet (G11-4500-04).
G13-2220-04 Used for fi xing the Terminal ASSY.
G11-4538-04 2 pieces
Used for fi xing the Terminal Block and the Packing (Terminal
J99-0747-04
Block).
Remark