UnderCover APEX BASE-CAMP TENT User Handbook Manual page 8

Overview
TM
It is important that you read this carefully before attempting the Setup!
1. Extend the tie-down ropes aprox 5'
from each corner on the roof-line and
properly stake.
2. Move the dome-room into position so
the connecting zippers on the camp-
base and dome-room easily fit together.
Close the zippers from the top of the
arch all the way down both sides.
Connect the rest arch openning with
desire doors comes with.
3. Check to see the camp-base is square
and the door zippers work freely. Stake
the footplates of each leg with large
stakes. Pull the dome-room snug and
square. Stake through webbing loops on
each corner of the dome-room with a
small stake. Pull the guy ropes out and
stake them using the small stakes.
Your choice of APEX modular configurations:
All rights reserved Undercover 2016
®