Table of Contents
Advertisement
KX-WT115CE
Cross Reference:
Power Supply Circuit/Reset Circuit (P.9)
Check the RF part (P.29)
Check Point (Handset) (P.31)
Note:
*1 How to adjust +3.0V:
Execute the command "VDA"
Refer to Things to Do after Replacing X'tal (P.45) for Handset.
*2 How to adjust the frequency of X1:
To see the frequency, execute the command "SFR", then check the TP_CKM (IC1-57pin).
To adjust frequency, send command "SFR
*3 Refer to Troubleshooting by Symptom (Handset) (P.31)
" until the frequency counter becomes13.824 MHz
28
15Hz.
±
Advertisement
Table of Contents
Troubleshooting
