Dvr Installation & Connection; Hdd Installation - Home Guard HGDVK-44402 Instruction Manual

2 DVR Installation & Connection

2.1 HDD Installation

Depending on the package you have purchased, the hard disk drive may be included in the full package.
If it is not pre-installed, follow the installation instructions on this user manual.
Caution: DO NOT install or remove the hard disk drive while the device power is turned ON.
HDD Installation:
(1) Cut power firstly, and then remove screws on both sides & rear panel, and open DVR upper cover.
(2) Connect the data and power cables to the HDD and place the HDD on the DVR case. Carefully flip
the DVR case and secure the HDD to the DVR with the screws.
(3) Put the upper cover back carefully, and fix the cover with screws.
Note: Above procedures are for reference only. The practical operation may be different depending on
the DVR you purchased.
7