Dvr Starting Up; Start Wizard; Network Configuration - Home Guard HGDVK-44402 Instruction Manual

4 DVR Starting up

4.1 Start Wizard

Startup Wizard will help to configure the system and get the DVR works quickly.
4.1.1 Start Wizard
Click the Start Wizard to proceed to the next step
4.1.2 Network Configuration
If you connect to a router allows to use DHCP, please check the DHCP box. The router will assign
automatically all the network parameters for your DVR. Unless the network is manually addressed below
parameters:
IP Address: The IP address identifies the DVR in the network. It consists of four groups of numbers
between 0 to 255, separated by periods. For example, "192.168.001.100".
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that can be
used in a network. If IP address is like a street where you live then subnet mask is like a neighborhood.
The subnet address also consists of four groups of numbers, separated by periods. For example,
"255.255.000.000".
Gateway: This address allows the DVR to access the Internet. The format of the Gateway address is the
same as the IP Address. For example, "192.168.001.001".
DNS1/DNS2: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should be
enough just to enter the DNS1 server address.
11