Hardware Installation - Planet KVM-210 Series User Manual

2.2 Hardware Installation

The Switch KVM provides a standard 19-inch rack for the installation of devices. Please use the rack
installation accessories attached with the product package. First install the accessories to the device
and then the device to the rack.
Step 1. Place your KVM Switch on a hard flat surface, with the front panel positioned towards your front
side.
Step 2. Attach a rack-mount bracket to each side of the KVM Switch with supplied screws attached to
the package.
1) You must use the screws supplied with the mounting brackets. Damage caused to the
parts by using incorrect screws would invalidate your warranty.
2) Please make sure computer and switch KVM are turned off.
Step 3. Secure the brackets tightly.
Step 4. Follow the same steps to attach the second bracket to the opposite side.
Step 5. After the brackets are attached to the Web Smart Switch, use suitable screws to securely
attach the brackets to the rack.
14
- -
8-/16-port Combo KVM Switch
IKVM/KVM-210 Series