ARAG ATLAS 100 Installation, Use And Maintenance Manual

ARAG ATLAS 100 Installation, Use And Maintenance Manual

Gps speed sensor for bravo 180s/300s

Advertisement

46701651- GPS SPEED SENSOR
46701652- GPS SPEED SENSOR
FOR BRAVO 180S/300S
INSTALLATION, USE AND MAINTENANCE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATLAS 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ARAG ATLAS 100

  • Page 1 46701651- GPS SPEED SENSOR 46701652- GPS SPEED SENSOR FOR BRAVO 180S/300S INSTALLATION, USE AND MAINTENANCE...
  • Page 2: Table Of Contents

    This manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or change of ownership. Keep it for any future reference; ARAG reserves the right to modify product specifications and instructions at any moment and without notice.
  • Page 3: Intended Use

    ATLAS100 outputs a signal having a frequency proportional to farming machine speed (please refer to section 10 “Technical data” for further details). ARAG devices provided with input for speed sensor can rely on this information after connection to ATLAS 100 sensor by means of the suitable cable supplied in the package.
  • Page 4: Dimensions

    DIMENSIONS Fig. 1 POSITIONING The user must position the speed sensor correctly as specified in this manual and properly account for the greater obstacle clearance height of the vehicle. WARNING: The speed sensor does not feature any function able to set off the position error that occurs while working on an in- clined surface: therefore we advise against using it to operate on inclined surfaces (hill) if the system as a whole is not provided with other solutions able to measure and correct such position errors.
  • Page 5 (fig.7). It is the operator's responsibility to ensure that the system is fixed securely in place. ARAG is not liable for any damage in the event the speed sensor should come off, regardless of the fixing method used.
  • Page 6: Wiring Connections

    • ARAG is not liable for any damage to the equipment, persons or animals caused by failure to observe the above instructions. • ATLAS 100 speed sensor is intended to be electrically powered by other devices. In this case it is necessary to install a 0.5A fuse on power positive cable.
  • Page 7: Led Signals

    RS232_RX (IN) *: contacts of connector on welding side ARAG is not liable for any damage to the system, persons, animals or property caused by speed sensor wrong or unsuitable assembly. Failure to observe the above instructions automatically voids the warranty.
  • Page 8: Technical Data

    Dispose of the system in compliance with the established legislation in the country of use. WARRANTY TERMS 1. ARAG s.r.l. guarantees this apparatus for a period of 360 days (1 year) from the date of sale to the client user (date of the goods delivery note).
  • Page 9 Page intentionally left blank...
  • Page 10 Only use genuine ARAG accessories or spare parts to make sure manufacturer guaranteed safety conditions are maintained in time. Always refer to ARAG spare parts catalog. Via Palladio, 5/A 42048 RUBIERA (Reggio Emilia) - ITALY Tel. +39 0522 622011 Fax +39 0522 628944 http://www.aragnet.com...

Table of Contents

Save PDF