Sony FD TRINITRON VEGA KV-3 6FV16 Operating Instructions Manual page 15

Back Panel Descriptions
Connection Description
1AUX Allows you to view local and cable channels if your cable
(except provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
KV-36FS12)
on the remote control. Devices connected to the AUX
input cannot be viewed in PIP.
2TO CONVERTER This is a VHF/UHF out jack that lets you set up your TV
(except to switch between scrambled channels (through a cable
KV-36FS12) box) and normal cable channels (CATV). Use this jack
instead of a splitter to get better picture quality when
needing to switch between scrambled and unscrambled
cable channels.
3VHF/UHF Connects to your VHF/UHF antenna or cable.
4S VIDEO Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
5MONITOR OUT
Lets you record the program you are watching to a VCR.
(except models When two VCRs are connected (see page 17), you can
KV-36FS12 and use your TV as a monitor for tape-to-tape editing.
36FS16)
6AUDIO (L/R)/ Connects to the audio and video OUT jacks on your VCR
VIDEO or other video component. A third video input (VIDEO
2) is located on the front panel of the TV. The Audio and
Video IN jacks provide better picture quality than the
VHF/UHF jack.
7AUDIO OUT
Connects to the left and right audio inputs of your audio
(VAR/FIX) or video component. You can use these outputs to listen
L (MONO)/R to your TV's audio through your stereo system.
Allows the TV to receive (IN) and send (OUT) remote
8S-LINK
CONTROL S IN/OUT control signals to other Sony infrared-controlled audio or
(except models video components.
KV-36FS12 and
36FS16)
9Y, P , P , L, R Connects to your DVD player's or Digital Set-top box's
B R
component video (Y, P
Installing the TV
, P ) and audio (L/R) jacks.
B R
9