Pioneer AVH-3400DVD/XUEW5 Service Manual page 70

1
EDC. Image of the test mode
A
EDC1/2 test mode
0000 0000
(1)
Layer 0 selection
0000 0000
B
1003 0000
(1)-(4)
ID designation
Layer 0:10** ****
Layer 1:11** ****
[Note] ** **** is the ID designation value
(5)
EDC1/2 start
Layer 0:20** ****
Layer 1:21** ****
C [Note] ** **** is the present ID designation value
**** ****
[Note] **** **** is the present ID designation value
Image of the LD power on time mode.
D
LD power on time mode
0000 0000
(1)
CD LD power on
time indication
10** ****
[Note] ** **** is the CD LD
power on time.
E
[Note] If the power on time is 999999 hours or more, it is always reported as 999999 hours.
[Note] If the power on time is "*E** ****", the value may not be correct due to the life of the flash memory.
F
70
1
2
[Note] Image is the same for both EDC1 and EDC2.
(2)
Layer 1 selection
0100 0000
1103 0000
[Note] The display is updated at 0.5 seconds interval until 0/1 layer is selected or Eject is effected.
(2) (5)
DVD LD power on CD LD power on
time setting
time indication
20** ****
[Note] ** **** is the DVD LD
30** ****
power on time.
[Note] ** **** is the setting time.
(1)-(4)
Setting time
designation
(5)
Setting time
registration
10** ****
[Note] ** **** is the CD LD
power on time.
[Method of setting time designation]
Designate the digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4).
Fix by command (5). Cancel by command (8).
AVH-3400DVD/XUEW5
2
3
Legend:
... Key operation
... Operational state
... The content displayed on the DVD mechanism (video only)
8 characters data is sent to the product side (HOST) by UART communication.
[Note] Eject can be effected any time during the
EJECT operation
Eject
Test mode Eject
After completion of EJECT operation
Legend:
... Key operation
... Operational state
... The content displayed on the DVD mechanism (video only)
8 characters data is sent to the product side (HOST) by UART communication.
(6)
DVD LD power on
time setting
40** ****
[Note] ** **** is the setting time.
(1)-(4)
(8) Setting time
designation
(5)
Setting time
registration
20** ****
[Note] ** **** is the DVD LD
power on time.
3
4
EDC test mode.
(8)
4