Table of Contents
Advertisement
The camera will take pictures or record video when
motion is detected and/or at specific time intervals,
according
switching the camera to the ON position, the red LED
motion indicator will blink for about 1 minute and
then turn off. This preset time allows you to adjust
the camera's position if needed, before the camera
becomes active.
2.5 Manual Image / Video Capturing
Place the camera in TEST/SETUP mode and press the
"SHOT" button on the right of the control pad to
manually capture photos or record video.
Press "SHOT" again to stop capturing video.
2.6 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press the
"OK/Play" button to view images or videos. The latest
image or video will be shown on the LCD screen.
To view:
Press ▲ or ▼ to view the next or previous image or
video.Press "SHOT" to start a video.
To delete:
Press OK in Test/Setup Mode to enter into Playback
mode and access the pictures and videos. Press the ▲
or ▼ to toggle between photos to find the photo(s) to
delete. Once selected, press the "MENU" button and
the options Del One and Del All appear. Press OK
to
the
programmed
- 6 -
Trail Cameras – BG668 36MP Series
settings.
After
Hide quick links:
Advertisement
Table of Contents
