Trigger Modes - Bolymedia BG668 36MP Series User Manual

 Find the picture you want to manually send
 Press the MENU button to pull up the Send To:
option that is currently set in the camera settings
 Press OK again to send the picture via the
messaging option chosen in your camera settings
The Send Mode settings will dictate what time you want
pictures sent to you. When in the ON mode, the options
"Daily Report" and "Instant" will be active, allowing you
to receive a daily report of all your photos taken or instant
messaging of your photos being taken (based on you
settings).

2.8 Trigger Modes

There are 3 different trigger modes for the camera: PIR
Trigger/Sensitivity,
PIR/Time Lapse mode. These modes are activated by
three different menu options (PIR Trigger/Sensitivity,
PIR Interval, and Time Lapse).
 PIR Trigger/Sensitivity
In this trigger mode, the camera will activate when
motion is detected. If the PIR Trigger/Sensitivity option is
set to OFF, the camera will not respond to any motion
within the camera's trigger detection range.
 Time Lapse
In this camera mode, the camera will activate at the set
time interval regardless of motion detection. If the Time
Lapse option is set to OFF, this trigger function will be
disabled.
 Combined PIR/Time Lapse
Time Lapse,
- 8 -
Trail Cameras – BG668 36MP Series
and a combined