Battery Safety Warning For Ieee1725; Charging Safety Warning - Sonim XP8800 User Manual

BATTERY SAFETY WARNING FOR IEEE1725

Do not disassemble or open crush, bend or
deform, puncture or shred.
Do not modify or re manufacture, attempt to
insert foreign objects into the battery, immerse or
expose to water or other liquids, expose to fire,
explosion or other hazard.
Only use the battery for the system for which it is
specified.
Only use the battery with a charging system that
has been qualified with the system per CTIA
Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified
battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
Do not short circuit a battery or allow metallic
conductive objects to contact battery terminals.
Promptly dispose of used batteries in
accordance with local regulations.
Replace the battery only with another battery
that has been qualified with the system per this
standard, IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion,
leakage or other hazard. Only authorized service
providers shall replace battery. (If the battery is
non-user replaceable).
Battery usage by children should be supervised.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a hard
surface, and the user suspects damage, take it
to a service center for inspection.
Improper battery use may result in a fire,
explosion or other hazard.
HAZARDOUS LOCATION USAGE WARNING

CHARGING SAFETY WARNING

The equipment shall only be charged when in the
non-hazardous area using a charger specifically
supplied for use with the unit USB cable and
AC charger S42A02(US plug)/ S42A00(EU plug)/
S42A01(UK plug).
DC5 V/2A pin recommend to use charger with
SELV function.
9