Burtonsafes BURTON DUO DEAD - BOLT User Instructions

ABOUT BURTON DUO SWING-BOLT LOCK
The lock operates with a numeric six-digit code. A
secondary code can be added. Each key press is
confirmed with an beep and light signal.
A Time Delay (1-99 min.) can be activated and
Opening window (1- 19 min.) can be customised.
After entry of a valid code a double beep follows.
An invalid entry is followed by a long signal. After
1 O seconds without entry, a started entry code
is cancelled.
4 consecutive invalid codes initiates 5 minutes time
penalty. Wait 5 minutes and try again. 2 more
consecutive invalid codes will restart additional 5
minutes penalty period.
Burton Safes Limited Brockholes Business Park, Rock Mill Road, Brockholes, Holmfirth HOB 7BN. t 01484 663 388 f 01484 666 338 enquiries@burtonsafes.co.uk www.burtonsafes.co.uk
Enter a valid six-digit code: i.e. [1 ][2][3][4][5][6]
•
(factory code); (lock beeps every time a digit is
entered).
If code is correctly entered, lock gives a double
•
beep after the last digit is pressed.
Turn the keypad 80 degrees clockwise until it stops.
•
Pull door open.
•
• Press and hold Key [O] until double beep. (The LED
remains on throughout the following actions).
• Enter old code (double beep).
• Enter new code (double beep).
• Repeat new code (double beep).
(In case of entry errors (long beep), the old code remains valid).
BS-Inst-023
Oct - 16