Sony Walkman NWZ-ZX1 Help Manual page 171

Help Guide
How to Use
WALKMAN
NWZ-ZX1
Back Back to Top
Making a Bluetooth connection using the NFC function
Simply touch your Walkman to a Bluetooth audio device that has the NFC function to automatically turn on the power
of the Bluetooth audio device, pair the Walkman and the Bluetooth audio device, and make a Bluetooth connection.
1. If the Bluetooth audio device has an NFC switch, turn the NFC switch on.
2. Touch your Walkman to the Bluetooth audio device.
Touch the N-mark of your Walkman to the N-mark of the Bluetooth audio device. Hold together until instructions
appear on the screen of the Walkman.
3. Follow the on-screen instructions to complete the connection.
Hint
Touch the devices together again to disconnect.
Take the following measures if the connection is poor.
Slowly move your Walkman over the N-mark of the Bluetooth audio device.
If your Walkman is in a case, remove the case.
Tap - [Settings] - [More] and check that [NFC] is checked.
Notes on use
4-475-926-12(1)
Copyright 2014 Sony Corporation
Print
Go to Page Top
163