NETGEAR EX6130 Quick Start Manual page 11

12. Click the CONTINUE button.
A message displays confirming that the extender is connected to the
new extender WiFi network.
13. Click the NEXT button.
The registration page displays.
14. Complete the registration fields and click the FINISH button to
complete the setup.
If you do not want to register your extender, click the Skip
Registration link. Note that you must register your extender before
you can use NETGEAR telephone support.
The Status page displays.
15. Unplug the extender and move it to a new location about halfway
between your router and the area with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
16. Plug the extender into an electrical outlet and wait for the
Power LED to light green.
17. Use the Router Link LED to help you choose a spot where the
extender-to-router connection is optimal.
11