Playing Audio Files - Sony CLIE Audio Player for Adapter Operating Instructions Manual

Playing audio files on your CLIÉ handheld

Playing audio files

Play songs as follows using Audio Player for Adapter.
Charge the battery fully before starting playback.
Notes
• If the battery power level of CLIÉ handheld runs low, playback stops automatically.
In this case, you can still use other applications such as Memo Pad or Address Book.
Remove the Audio Adapter and charge the battery before it becomes completely
empty.
• If the battery power level of your CLIÉ handheld runs low, power may turn off
suddenly or an error message may appear when you start the Audio Player for
Adapter.
1
Connect the headphones to your Audio Adapter.
2
Connect the Audio Adapter to your CLIÉ handheld.
3
Insert the Memory Stick media into the Memory Stick slot of
your CLIÉ handheld.
4
On the home screen, rotate the JogDial navigator to select
Audio Player and then press the JogDial navigator.
Or, tap the Audio Player icon on the home screen.
Audio Player for Adapter starts and then reads the TOC information
including the song name, artist name and so on of the Memory Stick
media.
While TOC reading, the Memory Stick indicator of the CLIÉ handheld
flashes.
Do not remove the Memory Stick media at this time. If you do, the audio
data may be damaged and a malfunction may occur.
Notes
• Unless the built-in battery of the CLIÉ handheld is sufficiently charged, a
malfunction may occur, e.g., Audio Player for Adapter does not start, does not
operate, or suddenly turns off. Be sure to check the remaining battery charge before
using the Audio Player for Adapter.
• Depending on the number of songs stored in the Memory Stick media, it may take
several seconds to read the TOC data. You cannot operate Audio Player for Adapter
while it is reading the TOC information including the song name, artist name and
so on; this is not a malfunction.
Continued on next page
18